If a ATC CNC woodworking cutting machine is to be used for a long time, in addition to the quality of its own equipment needs to be guaranteed, the maintenance of the woodworking cutting machine during use is also very important. If you do not pay attention to the maintenance of woodworking cutting machine equipment, or there are maintenance misunderstandings, it is easy to cause unnecessary damage to woodworking cutting machine equipment.
Lubricating equipment is an important part of maintenance. Adding lubricating oil to woodworking cutting machines is not as simple as imagined. The correct way is:
1. Before adding lubricating oil, clean the guide rail and lead screw of the woodworking cutting machine, and use a cloth to clean off the residual oil stains and material chips on the guide rail and lead screw.
2. The more appropriate lubricating oil maintenance cycle is twice a month, that is, adding lubricating oil for maintenance every two weeks.
3. If the CNC woodworking cutting machine is idle for a long time, it should be refueled regularly to ensure the flexibility of the transmission system.
4. After adding oil, the ATC CNC woodworking cutting machine should be adjusted to run back and forth at a slow speed to ensure that the added lubricating oil can be evenly added to the guide rail and screw of the CNC woodworking cutting machine.
ATC CNC woodworking cutting machine is like our body, we should pay more attention to maintenance. In this way, the problem can be detected early, and the earlier it is found, the easier it is to solve it.
