The accuracy of laser tube cutting is an important factor to measure the quality of a laser tube cutting machine. The accuracy of an excellent fiber laser tube cutting machine does not entirely depend on the equipment itself, but is affected by various conditions. The following Let's take a look at what factors affect the accuracy of the laser tube cutting machine.
1. The spot size of the laser beam irradiated on the surface of the material:
When we usually cut metal sheets, we can observe that the laser beam is actually a very fine spot, which is tapered, so the gap of the laser pipe cutting machine is also tapered. In general, the thickness of the workpiece directly affects the laser pipe cutting. The accuracy of the machine, the thicker the material, the lower the accuracy, so the larger the slit.
2. Different materials:
When the conical laser beam is focused, the spot will become smaller and smaller at this time, so the precision of the laser tube cutting becomes higher and higher, especially the width of the slit becomes smaller and smaller. At this time, the smallest spot can reach 0.01mm, which is also one of the factors that affect the cutting accuracy of the laser tube cutting machine.
In this case, the cutting accuracy of different materials is slightly different, even if the same material has different components, the cutting accuracy will also be different. Therefore, the workpiece material also has a certain influence on the accuracy of laser tube cutting. The high-precision workbench of the laser tube cutting machine is matched with a stable linear guide rail and a stepping motor, which also affects the high-precision laser tube cutting effect of the laser tube cutting machine.
