If the engraving effect of the engraving machine does not necessarily meet the customer's requirements one hundred percent, especially if the engraving effect is not smooth enough, it is necessary to find out the reason and deal with it in time. But when we are actually working, if this happens, it is mainly due to these two reasons:
1. There may be gaps in the y-axis or x-axis of the engraving machine, or there may be gaps in the two axes at the same time, resulting in shaking during the engraving process, causing deviations in the engraving path and causing unsmooth lettering;
Solution: change the straight line or curve speed, and change the value to determine the parameters of the engraving machine itself.
2. The difference between the linear speed of the engraving machine and the speed of the curve is too large, which causes the engraving machine to vibrate too much when walking the curve, which makes the engraving path deviate and the lettering is not smooth.
Solution: If the engraving machine has a round rail, it is necessary to find a way to change the guide rail or slider, and the movement will be relatively large, depending on the reason. If it is a square rail, it is much simpler, just adjust the up and down or front and rear sliders;
If none of the above two methods can solve your problem, you are welcome to contact us in time by the following phone number: +86-15965629053.
