How to derust the spindle motor of woodworking engraving machine?
Wood router CNC machine spindle rust is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust. Slight rust does not affect the normal use of the spindle motor, but if left untreated for a long time, it will shorten the life of the spindle motor.
Woodworking engraving machine spindle motor derusting method:
1. Rely on manual knocking, shoveling, scraping, brushing, sanding or flexible filing to remove surface rust, scale, etc. This is a radical rust removal method for painters, and shovels, scrapers, pointed hammers, and wire brushes can also be used This method is relatively simple, but it is also easy to damage the machine. The maintenance personnel need to be very careful when cleaning the rust. A little carelessness will easily cause the main shaft of the machine to deviate from the track.
2. Use a clean lubricant and spray it evenly on the motor. After about half an hour, you can wipe off the rust on the stone engraving machine with a cotton cloth. If the rust is severe, you can spray the lubricant several times. Lubricating cleaners are non-conductive and have a good lubricating effect.
