According to different engraving goals, the selected woodworking engraving machine bits are also different. The benefits brought to us by the correct choice are twice the result with half the effort. Similarly, when we choose to make mistakes, it will play the opposite side. Here I will tell you Introduce the problems that need to be paid attention to in the selection of woodworking engraving machine bits.
1. For acrylic cutting, it is recommended to use a single-edged helical milling cutter. It is characterized by smokeless and odorless processing, fast speed, high efficiency, non-stick chip, and truly environmentally friendly. Its special manufacturing process ensures that the processed acrylic will not burst , very fine knife lines (or even no knife lines), the surface is smooth and flat. The machined surface needs to achieve a frosted effect. It is recommended to use a double-edged and three-edged helical milling cutter.
2. For MDF cutting, it is recommended to use a double-edged large chip removal helical milling cutter. It has two high-capacity chip removal grooves and a double-edged design, which not only has a good chip removal function, but also achieves a good tool balance. When processing medium and high density boards, it has the characteristics of no blackening, no cap smoke, and long service life.
3. For aluminum plate cutting, it is recommended to use a single-edged aluminum milling cutter. It does not stick to the knife during processing, with high speed and high efficiency.
4. For precision small relief processing, it is recommended to use a round bottom carving knife.
5. For cork, MDF, native wood, PVC, and acrylic large-scale deep relief processing, it is recommended to use a single-edged spiral ball end milling cutter.
6. For cutting without burrs on the upper and lower sides, it is recommended to use single-edged, double-edged up and down milling cutters.
7. For high-density boards and solid wood, it is recommended to use ribbed milling cutters.
8. For multi-layer boards and plywood processing, it is recommended to use double-edged straight-slot milling cutters.
9. The use effect of the lower cutter, the upper surface of the processed product has no burrs, and the plate will not warp during processing.
10. It is recommended to use a diamond carving knife for woodworking engraving machine processing.
