How to carry out daily maintenance and maintenance on the foam sculpture engraving machine, we should pay attention to the following aspects:
1. The environmental requirements of the place where the foam sculpture engraving machine is placed: The foam sculpture engraving machine must be placed in a well-ventilated, cool and dry place. In order to avoid exposure to the sun, the countertop will bulge, and the paint sprayed on the surface of the whole machine will fall off.
2. Electricity consumption of foam sculpture engraving machine: The foam sculpture engraving machine is best to use 380V voltage, and it is best to be equipped with a voltage regulator with a larger wattage before installation to ground the ground wire, which is safe and guaranteed.
3. Do not use a networked computer for the foam sculpture engraving machine: The computer used for the foam sculpture engraving machine does not need to be connected to the Internet, and the oldest and simplest computer is fine. In order to avoid the situation that some viruses are easy to invade after networking and cause computer crashes and black screens.
4. the main components of the foam sculpture engraving machine are regularly oiled: After the foam sculpture engraving machine is used, we also need to maintain it regularly. Fill more oil where it should be filled, and check more where it should be maintained. In this way our machines can be used more smoothly and conveniently.
5. Regularly check whether there are potential hidden dangers in the circuit of the foam sculpture engraving machine: The foam sculpture engraving machine is used for a little longer. For example, one year or half a year, it is necessary to check the main box and the peripheral lines to see if there is any bad contact, so as to avoid the short circuit of the line and cause danger.
6. Do not place liquids and items with magnetic fields on the surface of the machine: Do not put some insignificant things on the bed table of the foam sculpture engraving machine and the computer operation cabinet, especially things with a magnetic field, as well as liquids, so as not to affect the machine after being sprinkled, and affect the quality of our machine. use. Seven, do not use the foam sculpture engraving machine for a long time: If we have not used the foam sculpture engraving machine for a long time, we should check the machine carefully before operating it, and wipe some oil on the parts that need to be filled with oil, which is good for the machine itself and easy for us to use , reduce the wear and tear of the machine, and make the service life of the machine longer.
