Stone engraving machine needs regular inspection and care after use. The engraving machine we have used for a long time will inevitably have some minor problems, so we have to repair it as soon as possible, so as not to delay the progress of our project. If we want to use it for a long time, then we must pay attention to the machine.
1. Stable voltage: Keeping the voltage stable is the first element to protect the electrical components of the machine. Generally, engraving machines have protection measures such as leakage protection devices and thermistors. If the voltage is unstable or the temperature is too high, the machine will alarm.
2. Enhanced lubrication: guide rails, lead screws and other accessories are the tracks during operation, regular injection of lubricating oil will help the running track to run stably and safely.
3. Cooling water temperature: stone engraving has a strong chipping force, the cooling degree of the spindle and cutting tool depends on the water temperature, a good cooling effect will help the service life of the spindle and cutting tool, prevent the water temperature from being too high in summer, and be careful of water freezing in winter.
4. Choose a good knife: Stone carving consumables are mainly knives. A good horse is equipped with a good saddle. Choosing a good knife can last for a long time. If you change the tool frequently, it will damage the tool holder and the spindle. The machine often starts and stops Incoherent work also affects the machine.
5. Reduce the load: the machine is a processing material, not a storage platform. During use, try to avoid stacking heavy materials on the beam of the machine. The care of the machine is your guarantee for long-term use.
6. Inspection and cleaning: After regular or long-term intensive work, keep the machine clean, avoid the accumulation of sludge, and check the machine to better extend the life of the machine.
