How to effectively solve the rust of the spindle of the stone engraving machine?
With more and more users of CNC engraving machines, stone engraving machines have also received more attention. The hardness of stone is higher, and compared with other engraving materials, the requirements for engraving machines are also higher. Therefore, relatively speaking, the performance of the stone engraving machine is also very high. Stone engraving machine can be used for stone lettering, stone relief, stone positive carving, stone negative carving, stone line carving, stone cutting, stone hollowing, suitable for carving and manufacturing of tombstone carvings, stone carving crafts and other workpieces.
Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not treated for a long time, it will shorten the life of the spindle motor and affect the use of the stone engraving machine.
The following editor will introduce to you the solution to the rust of the spindle of the stone engraving machine.
1. Physical method of derusting: Relying on manual knocking, shoveling, scraping, brushing, sanding or flexible filing to remove surface rust, scale, etc. This is a radical rust removal method for painters, and shovels, scrapers, pointed Head hammer, wire brush, emery cloth, broken saw blade and other tools are also the easiest way.
2. Chemical rust removal: You can use WD-40 cleaning lubricant and spray it evenly on the motor. After about half an hour, you can wipe off the rust on the stone engraving machine with a cotton cloth. If the rust is severe, you can do it several times. WD-40 is non-conductive and has a good lubricating effect.
The above is the method to deal with the rust of the stone engraving machine, and we must pay more attention to it in ordinary applications.
