What are the common faults of fiber laser cutting machines and how to solve them?
After the fiber laser cutting machine has been used for a long time, or due to lack of attention during normal use, some failures will occur. If there is a failure in the use of the fiber laser cutting machine, it will affect the work. The following are some fiber laser cutting machines common faults and solutions.
1. When the fiber laser cutting machine is working, there is a problem that there is no laser coming out suddenly: the first reaction should be whether the power cord is loose, then check whether the power cord is damaged, and finally check the laser tube, we need to eliminate and replace it in time.
2. The problem when there is a gap in the size cut by the fiber laser cutting machine: first check whether the settings in the fixed parameters of the equipment are normal-whether the parameters on the computer are correct, whether the number of pulses is normal, etc. A series of factors that may affect it, and finally look at it Check whether the settings on the drawing software are correct.
3. The surface of the workpiece cut by the fiber laser cutting machine is rough: check whether the material we are cutting is within the cutting range of the entire equipment. If it is, it is necessary to adjust the focusing mirror of the fiber laser cutting machine to make the laser equipment Fiber optics focus more finely, making the effect better.
The above is the solution to the common faults of the fiber laser cutting machine we talked about today.
