Stone engraving machine maintenance elements:
1. Clean up the machine in time after use. The stone engraving machine will produce a lot of dust during use, and too much dust will have a great impact on the life of the stone engraving machine. After each use, be sure to clean the dust on the platform and transmission system, and also lubricate regularly.
2. Ensure the cleanliness of the cooling water and the normal operation of the water pump. Cooling water is very important to the operation of the stone engraving machine. During use, the water spindle motor must not be short of water. At the same time, the cooling water needs to be replaced regularly to prevent the water temperature from being too high.
3. Cut off the power supply after the stone engraving machine is used, and monitor that the machine cannot be displayed and the main circuit power indicator light is off, so as to prolong the service life of the stone engraving machine.
