1).Manual adjustment Manually adjust the horizontal plane of the engraving machine. After adjusting the horizontal plane, check whether it is consistent with the horizontal line. After confirming that the adjustment is correct, start the engraving machine and turn the main shaft. Measure the distance by manual adjustment. If you cannot find a suitable one through manual adjustment The position can be stopped to ensure the accuracy of the engraving machine. We can measure at a suitable position. Of course, if the material of the engraving table of the engraving machine is different, the measurement results will be different, so it is also necessary to manually adjust the engraving machine. This factor is taken into consideration.
2). Computer adjustment The accuracy of adjusting the engraving machine through the computer is much more accurate than manual adjustment, but the difficulty has increased a lot in proportion. We can configure the engraving machine by opening the control panel in the engraving machine, and test the engraving machine through the test path. Carry out the calibration work, after the calibration is completed, save the path directly in the program.
