A butterfly flapping its wings thousands of miles away will cause a hurricane, and a small factor that is not noticed may become an obstacle that affects the work of the woodworking engraving machine.
Operators of woodworking engraving machines must be familiar with the application range of various materials, different materials, different thicknesses, and different finished product sizes. Familiar with different engraving methods of different materials.
The environmental factors that affect the work of the cabinet door engraving machine include the power supply, vibration, ambient temperature and humidity, dust, lightning, etc. of the surrounding environment.
The power supply of the cabinet door engraving machine has the most direct influence on the processing, mainly manifested as the disorder of the control system. Each electronic device and each functional component of the woodworking engraving machine control system has a certain voltage and frequency range. The overload operation of any part will inevitably lead to the instability of the whole system, and the most common phenomenon is processing deviation.
The impact of vibration is reflected in frequent knife breaking and rough surface. The common reasons are touching the machine tool during processing, unqualified installation level of the machine tool, and punching machines around.
Operation of various software of woodworking engraving machine:
1).Operators shall be trained on operation safety and operation precautions. Only after the trainees sign and approve the operation safety precautions can the operators conduct machine operation training.
2).Ambient temperature and humidity mainly affect the performance of the control system and the performance of the drive motor. When the ambient temperature is too high, the control system may have wrong control, and the drive torque of the drive motor may not reach the rated value.
3).Dust is a major killer of electronic components, mainly affecting the heat dissipation of electronic components and the sensitivity of photosensitive components. Common symptoms include light detection failure, computer CPU fan does not turn, etc. Therefore, it is necessary to regularly clean the computer and control the dust in the electric box to ensure the normal operation of the stone engraving machine.
