What kind of environment for placing woodworking lathe should we choose?
Woodworking lathes should be protected from direct sunlight, and should not be installed in places with too much humidity, excessive dust or too much pollution, otherwise it will cause the technical function of electronic components to decline, poor electrical contact or circuit short-circuit faults. Woodworking lathes should be kept away from equipment with large vibration, and special anti-vibration measures should be taken for high-precision lathes. Under the conditions, if the woodworking lathe is used in an air-conditioned environment, its failure rate will be significantly reduced. CNC carpenter lathes can be divided into carpenter sawing machines, carpenter planers, carpenter lathes, carpenter milling machines, carpenter drilling machines, tenoning machines, tenoning machines, carpenter sanding machines, and auxiliary machines for trimming and sharpening carpenter knives.
When the power supply fluctuates more than 10%, high-frequency clutter signals are often superimposed on the AC power supply, as well as instantaneous disturbance signals with large fluctuations, which can easily damage the program or parameters in the woodworking lathe and affect the normal operation of the lathe. If conditions permit, use dedicated line power supply or add power supply voltage stabilization equipment to woodworking lathe manufacturers to reduce the impact of poor power supply quality and reduce electrical disturbances. Some small enterprises will increase the added value and profit rate of their products by taking specialization and specialization, and form their own advantages in the market competition.
1. Checking the tightness of the operating belt is a basic task. It should be noted that do not put your fingers between the belt and the pulley, and simply crush your fingers.
2. Check the motor, mechanical system, etc. to ensure that there is no abnormal noise. There is a special abnormal sound indicating that the machine has been in trouble.
3. Check whether the protective cover, door and other safety protection devices are safe and operate normally.
4. Before the spindle is operated, the chuck or chuck should be tightened to prevent the chuck claws from being thrown out or the chuck flying out.
5. During active operation, each moving part on the machine tool must operate actively according to the program, and at the same time check the movement of each moving part, it should be smooth without abnormal noise.
