1. Keep the working area clean, keep the surrounding area of the machine dry, and keep the working area well lit;
2. Keep the machine tool clean, add lubricating oil to each moving part before starting the machine every day, and adjust the machine tool according to the instructions after idling for three minutes, and check whether the handle of each part of the machine tool is in the normal position;
3. Clean the rack on the guide cylinder, and be sure to keep it clean frequently;
4. Take care of the work surface and guide rail surface of the machine tool, and do not place blanks, hand hammers, wrenches, files, etc. directly on the work surface and guide rail surfaces;
5. Press the computer shutdown program to shut down the computer before leaving get off work, cut off the power supply, and wipe the oil stains on the keyboard and monitor;
6. The workshop operator must turn off the computer half an hour before leaving get off work every day, clean the machine tool, add lubricating oil to each moving part, clean the workshop environment, and leave after the workshop manager has checked it.
The above maintenance steps must be performed in accordance with the regulations every day, so as to ensure that the mechanical equipment can reduce the failure caused by various external factors, thereby effectively prolonging the service life of the mechanical equipment.
