The operator does not participate in the operation during the machining process, so the machining accuracy of the workpiece is all guaranteed by the machine tool, eliminating the operator's human error. CNC woodworking lathe manufacturers today teach you the causes and troubleshooting methods of common failures of CNC woodworking machine tools.
1, listen
When receiving a maintenance request, you should listen carefully to the phenomenon reflected in the work, and ask clearly where there are doubts, so as to eliminate the problems caused by human factors.
Listen to the running sound on site to see if there is any abnormal noise.
2, look
1). Check whether the operation process is normal.
2). Observe the accuracy of the parts and the chip marks on the surface of the parts in order to judge whether they are locked and whether the repetition is good.
3, turn
For some faults, don't rush to disassemble, you can turn the frame manually. For the four-station frame, there is a 6mm inner hexagonal hole at the end of the worm. First, remove a sealing screw at the section, and then use a hexagonal wrench or screwdriver to rotate the worm to make the station frame index and lock.
